Modular Community & Church Halls

A warm, flexible hall for the whole community: main hall, kitchen, accessible toilets, a meeting room and storage. Built off site, so the cost and programme are clear from the start. Every building is engineered for permanent use, fully insulated and finished inside before it leaves the factory.

• Parish and town councils
• Churches
• Village hall committees
• Community groups

• Main hall
• Kitchen or servery
• Accessible and standard WCs
• Meeting room
• Chair and table store
• Good insulation for low running costs

Usually 60 m² to 200 m².

Modular buildings from £450 + VAT per m², with most specifications typically falling between £450 and £850 + VAT per m². Where community halls sit in that range depends on size, internal fit-out, finishes and equipment. Groundworks and delivery are priced separately. Design yours online to see an estimate for your exact specification.

Most buildings sit on a level concrete slab, pad foundations or ground screws. We'll confirm the right base for your ground conditions and building, and you can use your own groundworker or ask us to arrange it.

Power, water and drainage; optional heat pump.

The building is delivered by lorry and lifted into position, usually by crane. We check access, lifting positions and overhead obstructions in advance. Once in place, services are connected and the building is ready to use.

Yes. Layout, size, doors, windows, cladding, colours, internal finishes and equipment can all be chosen. If you need something unusual, see bespoke modular buildings.